Kia Sorento XM (2009+) - замена шруса
Replacement 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A) from front hub. 1 copy.jpg 24.38К 6 Количество загрузок: Be careful not to damage to the hub bolts © when removing the front wheel and tire (A). 3. Remove castle nut (B) from the front hub under applying the break. Tightening torque: 215.7N.m(22.0Kgf.m, 159.1lb.ft) 2 copy.jpg 25.94К 7 Количество загрузок: - Have the convex side of washer © facing the outside, and then install castle nut (B) and split pin(A) to the driveshaft. - After fastening castle nut to the initial tightening torque (22.0Kgf.m), fit the closest hole in the direction of fastening. 3 copy.jpg 22.88К 7 Количество загрузок: