Kia Sorento XM (2009+) - замена сцепления
Removal 1. Remove the transaxle assembly. (Refer to "Manual transaxle system" in MT group) 2. Insert the special tool (09411-25000) in the clutch disc to prevent the disc from shifting. Kia Sorento XM 2009 - замена сцепления (1).jpg 52.97К 14 Количество загрузок: 3. Loosen the bolts(6ea) which attach the clutch cover to the flywheel in a star pattern. Loosen the bolts in succession, one or two turns at a time, to avoid bending the cover. Do not clean the clutch disc or the release bearing with cleaning solvent. When reusing a removed clutch Find the position of the stop (A): • There is only one. • It is located on the pitch circle of cover assembly bolts between the bolt mount and the dowel pin, wedged between the cover assembly and the flywheel. • The head of the guide bolt sticks out about 3 mm from the housing. Kia Sorento XM 2009 - замена сцепления (2).jpg 50.16К 12 Количество загрузок: • Loosen the cover assy bolts opposite each other in increments (in approx. 5 stages), and • Check that the stop (B) loosens and slides down to the block in the housing. • The stop (B) must loosen when unscrewed from the housing (about 2mm). • If necessary, push the guide boltb (A)toward the flywheel. • Loosen the cover assy bolts and remove the clutch from the flywheel. • Place the cover assy on a clean surface. • Do not clean the clutch disc or the release bearing with cleaning solvent. Kia Sorento XM 2009 - замена сцепления (3).jpg 30К 10 Количество загрузок: