Личный гаражKia Sorento XM (2009+) - замена сцепления
Removal
1.
Remove the transaxle assembly. (Refer to "Manual transaxle system" in MT group)
2.
Insert the special tool (09411-25000) in the clutch disc to prevent the disc from shifting.
Kia Sorento XM 2009 - замена сцепления (1).jpg 52.97К
14 Количество загрузок:
3.
Loosen the bolts(6ea) which attach the clutch cover to the flywheel in a star pattern. Loosen the bolts in succession, one or two turns at a time, to avoid bending the cover.
Do not clean the clutch disc or the release bearing with cleaning solvent.
When reusing a removed clutch
Find the position of the stop (A):
•
There is only one.
•
It is located on the pitch circle of cover assembly bolts between the bolt mount and the dowel pin, wedged between the cover assembly and the flywheel.
•
The head of the guide bolt sticks out about 3 mm from the housing.
Kia Sorento XM 2009 - замена сцепления (2).jpg 50.16К
12 Количество загрузок:
•
Loosen the cover assy bolts opposite each other in increments (in approx. 5 stages), and
•
Check that the stop (B) loosens and slides down to the block in the housing.
•
The stop (B) must loosen when unscrewed from the housing (about 2mm).
•
If necessary, push the guide boltb (A)toward the flywheel.
•
Loosen the cover assy bolts and remove the clutch from the flywheel.
•
Place the cover assy on a clean surface.
•
Do not clean the clutch disc or the release bearing with cleaning solvent.
Kia Sorento XM 2009 - замена сцепления (3).jpg 30К
10 Количество загрузок:
