Сообщений в теме: 3

[krionika]

Технические характеристики двигателя Kia Carens 1 (FJ) 1.8L бензин

Engine model			TBD
Item
Type			Gasoline, 4 cycle
Cylinder arrangement and number			In line, 4 cylinder
Combustion chamber			Pentroof
Valve system			DOHC, belt driven (IN : 2, EX : 2)
Displacement			109.4cu-in (1,793cc)
Bore and stroke			3.19×3.43in (81.0×87.0mm)
Compression ratio			9.4 : 1
Compression pressure			193psi (1,333kpa, 13.6kg/cm²)-300rpm
Valve timing	IN	Open	6°
		Close	46°
	EX	Open	50°
		Close	10°
Valve clearance	IN		0 : Maintenance-free
	EX		0 : Maintenance-free
Idle speed *1			800 ± 50rpm
Ignition timing *2			8° ± 5° BTDC
Firing order			1-3-4-2

[krionika]

Технические характеристики двигателя Kia Carens 1 (FJ) 2.0L дизель

Description	Specification 2.0(D4EA)	Limit
General Type Number of cylinders Bore Stroke Total displacement Compression ratio Firing order	In-line, Single Overhead Camshaft 4 83 mm (3.27 in.) 92 mm (3.62 in.) 1991 cc (121.5 cu.in.) 17.7:1 1-3-4-2
Valve timing Intake valve Opens (BTDC) Closes (ABDC) Exhaust valve Opens (BBDC) Closes (ATDC)	7° 43° 52° 6°
Cylinder head Flatness of cylinder head bottom surface Dimensions for reworking oversize valve seat hole Intake 0.3 mm (0.012 in.) O.S. 0.6 mm (0.024 in.) O.S. Exhaust 0.3mm (0.012 in.) O.S. 0.6mm (0.024 in.) O.S.	Width directon : 0.03mm (0.0012 in) Length direction : 0.09mm (0.0036 in) 29.993-30.006 mm (1.18-1.1813 in.) 30.023-30.036 mm (1.182-1.1825 in.) 25.393-25.406 mm (0.9997-1.0002 in) 25.423-25.436 mm (1.0009-1.0014 in.)
Dimensions for reworking oversize valve guide hole (both intake and exhaust) 0.05mm (0.002in.) O.S. 0.25mm (0.010in.) O.S. 0.50mm (0.020in.) O.S.	12.805-13.205 mm (0.504-0.519 in.) 12.825-13.225 mm (0.5049-0.5206 in.) 12.85-13.25 mm (0.5059-0.5216 in.)
Camshaft Cam height Intake Exhaust Journal O.D. Bearing oil clearance End play	34.697 mm (1.366 in.) 34.570 mm (1.361 in.) 28 mm (1.10 in.) 0.040-0.074 mm (0.0020-0.0029 in.) 0.05-0.15 mm (0.002-0.006 in.)	34.197 mm (1.346 in.) 34.070 mm (1.341 in.)
Valve Valve length Intake Exhaust Stem O.D. Intake Exhaust Face angle Thickness of valve head (margin) Intake Exhaust Valve stem to valve guide clearance Intake Exhaust	95.7 mm (3.77 in.) 95.4 mm (3.76 in.) 5.953 mm (0.234 in.) 5.925 mm (0.233 in.) 44.5° 1.6 mm (0.063 in.) 1.3 mm(0.0512 in.) 0.022-0.067 mm (0.00086-0.00264 in.) 0.050-0.095 mm (0.0020-0.00374 in.)	0.1 mm (0.0039 in.) 0.15 mm (0.0059 in.)
Valve guide Length Intake Exhaust Service over size	36.5 mm (1.437 in.) 36.5 mm (1.437 in.) 0.05, 0.25, 0.50 mm (0.002, 0.010, 0.020 in.)
Valve seat Width of seat contact Seat angle Service size	1.21mm (0.0477 in.)/ 1.61mm(0.0634 in.) (IN/EX) 45° 0.3 mm (0.012 in.), 0.6 mm (0.024 in.) oversize
Valve spring Free length Load	39.14 mm (1.541 in.) 21.4 kg/32 mm (47.2 lb/1.26 in.) at installed height	38.14 mm (1.502 in.)
Cylinder block Cylinder bore Out-of-round and taper of cylinder bore Flatness of gasket surface	83 + 0.03 mm (3.27 + 0.0012 in.) Less than 0.01 mm (0.0004 in.) Less than 0.05 mm (0.0020 in.)	0.1 mm (0.0039 in.)
Piston O.D. Piston - to - cylinder clearance Ring groove width No. 1 No. 2 Oil Service size	82.919 - 82.951 mm (3.26 - 3.27 in.) 0.069 - 0.091 mm (0.0027 - 0.0036 in.) 1.915 - 1.945 mm (0.075 - 0.076 in.) 2.06 - 2.08 mm (0.08 - 0.082 in.) 3.02 - 3.04 mm (0.119 - 0.1196 in.) 0.25 mm (0.010 in), 0.5 mm (0.020 in.) 0.75 mm (0.030 in.), 1.00 mm (0.039 in.) oversize
Piston ring Side clearance No. 1 No. 2 Oil ring End gap No. 1 No. 2 Oil ring side rail	0.083-0.115 mm (0.00327-0.00453 in) 0.065 - 0.11 mm (0.00256 - 0.00433 in.) 0.03 - 0.07 mm (0.00118 - 0.00275 in.) 0.2 - 0.3 mm (0.0079 - 0.0118 in.) 0.3 - 0.45 mm (0.0118 - 0.0177 in.) 0.2 - 0.45 mm (0.0079-0.0177 in.)
Connecting rod Connecting rod small end I.D Connecting rod bearing oil clearance Crankshaft main bearing oil clearance	28.022 - 28.034 mm (1.103 - 1.104 in.) 0.024 - 0.042 mm (0.0009 - 0.0016 in.) 0.024-0.042 mm (0.0009-0.0016 in.)	0.1 mm (0.0039 in.) 0.1 mm (0.0039 in.)
Crankshaft Journal O.D. End play	60.002 - 60.020 mm (2.362 - 2.363 in.) 0.09 - 0.32 mm (0.0035 - 0.0126 in.)
Flywheel Runout		0.13 mm (0.0051in.)
Oil pressure (1500 rpm) [Oil temperature is 95-105°C (203-221°F)]	More than 392.3 kPa (56.88 psi)
Oil pump Tip clearance Drive gear Driven gear Side clearance	0.12 - 0.2 mm (0.00472-0.0078 in.) 0.13 -0 .23 mm (0.0051-0.009 in.) 0.02 - 0.07 mm (0.00078 - 0.0027 in.)
Relief spring Free length Opening pressure	47.5 mm ( 1.835 in.) 558.98±49.03 kPa (5.7 ± 0.5 kg/cm², 81.07 ± 7.11 psi)
Silent shaft Front journal diameter Rear journal diameter Oil clearance Front Rear	27.99 - 28.01 mm (1.102 - 1.1027 in.) 41.99 - 42.01 mm (1.6531 - 1.6539 in.) 0.050 - 0.09 mm (0.0020 - 0.0036 in.) 0.050-0.091 mm (0.0020-0.0036 in.)
Cooling method Cooling system quantity (Radiator) Thermostat Type Normal opening temperature Opening temperature range Wide open temperature Radiator cap Main valve opening pressure Main valve closing pressure Vacuum valve opening pressure	Forced circulation with electric fan 5 lit (5.3 U.S.qts., 4.4 Imp.qts.) Wax pellet type with jiggle valve 85°C(185°F) 83.5°C-86.5°C (182.3°F-187.7°F) 100°C (212°F) 107.9±14.7 kPa (1.1±0.15 kg/cm² , 15.64±2.13 psi) 83.4 kPa (0.85 kg/ cm², 12.1 psi) -6.86 kPa (-0.07 kg/ cm², -1.00 psi)
Air cleaner Type Element Exhaust pipe Muffler Suspension system	Dry type Unwoven cloth type Expansion resonance type Rubber hangers
Coolant temperature sensor Type Resistance 20°C (68°F) 80°C (176°F)	Thermister type 2.45±0.14 kΩ 0.3222 kΩ

 

[krionika]

Технические характеристики двигателя Kia Carens 1 (FJ) 1.6L бензин

 Технические характеристики двигателя Kia Carens 1 (FJ) 1.6L бензин.gif   52.88К   5 Количество загрузок:

[krionika]

Технические характеристики двигателя Kia Carens 1 (FJ) 2.0L бензин

Description		Specifications (2.0 DOHC)	Limit
General
Type		In-line, DOHC
Number of cylinders		4
Bore		82mm (3.2283in)
Stroke		93.5mm (3.6811in)
Total displacement		1,975 cc (120.5 cu.in)
Compression ratio		10.1 : 1
Firing order		1-3-4-2
Valve timing (With CVVT)
Intake valve	Opens (ATDC)	11°
	Closes (ABDC)	59°
Exhaust valve	Opens (BBDC)	42°
	Closes (ATDC)	6°
Cylinder head
Flatness of gasket surface		Less than 0.03mm (0.0012in)	0.06mm (0.0024in)
Flatness of manifold mounting surface	Intake	Less than 0.15mm (0.0059in)	0.30mm (0.0118in)
	Exhaust	Less than 0.15mm (0.0059in)	0.30mm (0.0118in)
Valve guide hole diameter (Intake, Exhaut)	STD	11.000 ~ 11.018mm (0.4331 ~ 0.4338in)
	0.05 OS	11.050 ~ 11.068mm (0.4350 ~ 0.4357in)
	0.25 OS	11.250 ~ 11.268mm (0.4429 ~ 0.4436in)
	0.50 OS	11.500 ~ 11.518mm (0.4528 ~ 0.4535in)
Intake valve seat ring hole diameter	STD	33.000 ~ 33.025mm (1.2992 ~ 1.3002in)
	0.3 OS	33.300 ~ 33.325mm (1.3110 ~ 1.3120in)
	0.6 OS	33.600 ~ 33.625mm (1.3228 ~ 1.3238in)
Exhaust valve seat ring hole diameter	STD	28.500 ~ 28.521mm (1.1220 ~ 1.1229in)
	0.3 OS	28.800 ~ 28.821mm (1.1339 ~ 1.1347in)
	0.6 OS	29.100 ~ 29.121mm (1.1457 ~ 1.1465in)
Camshaft
Cam height (With CVVT)	Intake	44.518 ~ 44.718mm (1.7527 ~ 1.7605in)
	Exhaust	44.418 ~ 44.618mm (1.7487 ~ 1.7566in)
Journal outer Diameter (Intake, Exhaust)		27.964 ~ 27.980mm (1.1009 ~ 1.1016in)
Bearing oil clearance		0.02 ~ 0.061mm (0.0008 ~ 0.0024in)	0.1mm (0.0039in)
End play		0.10 ~ 0.20mm (0.0039 ~ 0.0079in)
Valve
Valve length	Intake	114.34mm (4.5016in)
	Exhaust	116.8mm (4.5984in)
Stem outer diameter	Intake	5.965 ~ 5.980mm (0.2348 ~ 0.2354in)
	Exhaust	5.950 ~ 5.965mm (0.2343 ~ 0.2348in)
Face angle		45° ~ 45° 30'
Thickness of Valve head (margin)	Intake	1.15mm (0.0453in)	0.8mm (0.0315in)
	Exhaust	1.35mm (0.0531in)	1.0mm (0.0394in)
Valve stem to Valve guide clearance	Intake	0.020 ~ 0.050mm (0.0008 ~ 0.0020in)	0.10mm (0.0039in)
	Exhaust	0.035 ~ 0.065mm (0.0014 ~ 0.0026in)	0.13mm (0.0051in)
Valve guide
Length	Intake	45.8 ~ 46.2mm (1.8031 ~ 1.8189in)
	Exhaust	54.3 ~ 54.6mm (2.1378 ~ 2.1496in)
Valve seat
Width of seat contact	Intake	1.1 ~ 1.5mm (0.0433 ~ 0.0591in)
	Exhaust	1.3 ~ 1.7mm (0.0512 ~ 0.0669in)
Seat angle	Intake	45° ~ 45° 30'
	Exhaust	45° ~ 45° 30'
Valve spring
Free length		48.86mm (1.9236in)
Load		18.8±0.9kg/39.0mm(41.4±2.0 lb/1.5354in)
		41.0±1.5kg/30.5mm(90.4±3.3 lb/1.2008in)
Out of squareness		Less than 1.5°	3°
Valve clearance
Cold (20°C ± 5°C) (68°F ± 9°F)	Intake	0.20mm (0.0079in)	0.12~0.28mm (0.0047~0.0110in)
	Exhaust	0.28mm (0.0110in)	0.20~0.38mm (0.0079~0.0150in)
Cylinder block
Cylinder bore		82.00 ~ 82.03mm (3.2283 ~ 3.2295in)
Flatness of gasket surface		Total : Less than 0.05mm (0.0020in) Bore to bore : Less than 0.03mm (0.0012in)
Piston
Piston outer diameter		81.970 ~ 82.000mm (3.2272 ~ 3.2283in)
Piston to cylinder clearance		0.020 ~ 0.040mm (0.0008 ~ 0.0016in)
Ring groove width	No. 1 ring groove	1.23 ~ 1.25mm (0.0484 ~ 0.0492in)
	No. 2 ring groove	1.22 ~ 1.24mm (0.0480 ~ 0.0488in)
	Oil ring groove	2.51 ~ 2.53mm (0.0988 ~ 0.0996in)
Piston ring
Side clearance	No. 1 ring	0.04 ~ 0.08mm (0.0016 ~ 0.0031in)	0.1mm (0.0039in)
	No. 2 ring	0.03 ~ 0.07mm (0.0012 ~ 0.0028in)	0.1mm (0.0039in)
	Oil ring	0.06 ~ 0.15mm (0.0024 ~ 0.0059in)	0.2mm (0.0079in)
End gap	No. 1 ring	0..23 ~ 0.38mm (0.0091 ~ 0.0150in)	1.0mm (0.0394in)
	No. 2 ring	0.33 ~ 0.48mm (0.0130 ~ 0.0189in)	1.0mm (0.0394in)
	Oil ring	0.20 ~ 0.60mm (0.0079 ~ 0.0236in)	1.0mm (0.0394in)
Piston pin
Piston pin outer diameter		20.001 ~ 20.006mm (0.7874 ~ 0.7876in)
Piston pin hole inner diameter		20.016 ~ 20.021mm (0.7880 ~ 0.7882in)
Piston pin hole clearance		0.010 ~ 0.020mm (0.0004 ~ 0.0008in)
Connecting rod small end hole inner diameter		19.974 ~ 19.985mm (0.7864 ~ 0.7868in)
Connecting rod small end hole clearance		-0.032 ~ -0.016mm (-0.0013 ~ -0.0006in)
Piston pin press-in load		350~1,350 kg (772~2,976 lb)
Connecting rod
Connecting rod big end inner diameter		48.000 ~ 48.018mm (1.8898 ~ 1.8905in)
Connecting rod bearing oil clearance		0.024 ~ 0.044mm (0.0009 ~ 0.0017in)
Side clearance		0.10 ~ 0.25mm (0.0039 ~ 0.0098in)	0.4mm (0.0157in)
Crankshaft
Main journal outer diameter		56.942 ~ 56.962mm (2.2418 ~ 2.2426in)
Pin journal outer diameter		44.946 ~ 44.966mm (1.7695 ~ 1.7703in)
Main bearing oil clearance		0.028 ~ 0.048mm (0.0011 ~ 0.0019in)	0.1mm (0.0039in)
End play		0.06 ~ 0.260mm (0.0024 ~ 0.0102in)	0.3mm (0.0118in)
Flywheel
Runout		0.1mm (0.0039in)	0.13mm (0.0051in)
Oil pump
Side clearance	Inner rotor	0.040 ~ 0.085mm (0.0016 ~ 0.0033in)
	Outer rotor	0.040 ~ 0.090mm (0.0016 ~ 0.0035in)
Body clearance		0.120 ~ 0.185mm (0.0047 ~ 0.0073in)
Relief valve opening pressure		490±49.0kpa (5±0.5kg/cm², 71±7.1psi)
Relief spring	Free length	43.8mm (1.7244in)
	Load	3.7±0.4kg/40.1mm (8.2±0.9 lb/1.5787in) 9.7±0.4kg/34.3mm (21.4±0.9 lb/1.3504in)
Engine oil
Oil quantity (Total)		4.0 L (4.23 US qt, 3.52 lmp qt)
Oil quantity (Oil pan)		3.7 L (3.91 US qt, 3.26 lmp qt)
Oil quantity (Oil filter)		0.3 L (0.32 US qt, 0.26 lmp qt)
Oil quality		Above SJ or SL
Oil pressure (Idle)		156.9kpa (1.6kg/cm², 22.8psi)
Cooling system
Cooling method		Forced circulation with cooling fan
Coolant quantity		6.8 L (7.19 US qt, 5.98 lmp qt)
Thermostat	Type	Wax pellet type
	Opening temperature	82±1.5°C(179.6±2.7°F)
	Pull opening temperature	95°C (203°F)
Radiator cap	Main valve opening pressure	93.16 ~ 122.58kpa (0.95 ~ 1.25kg/cm², 13.51 ~ 17.78psi)
	Vacuum valve opening pressure	0.98 ~ 4.90 kpa (0.01 ~ 0.05kg/cm², 0.14 ~ 0.71 psi)
Water temperature sensor
Type		Thermister type
Resistance	20°C (68°F)	2.45±0.14 kΩ
	80°C (176°F)	0.3222 kΩ