Сообщений в теме: 2

[getAway]

Kia Carens FJ (2001-2006) - снятие и установка радиатора кондиционера

REMOVAL 1. Discharge refrigeration system. (Refer to operatinginstructions of your refrigerant recovery/recycling/ charging station forproper procedures.) 2. Remove liquid pipes. 3. Remove condenser as shown in figure. • Insert protector such as cardboard between condenser and radiator. • Immediately plug open fittings to keep moisture out of system.

[getAway]

INSTALLATION
1.
Install condenser in reverse order of removal.

•
Apply clean compressor oil to O-rings before connecting fittings.
•
Do not apply compressor oil to fitting nuts.
•
Remove protector before installing radiator brackets.
•
When installing a new condenser, add compressor oil through high-pressurepipe port of compressor. Compressor oil: 1.22 cu in (20 cc)
Tightening torque:
Condenser inlet : 87~174 lb·in (9.8 ~19.6 N·m, 1.0~2.0 kg·m)

[getAway]

Kia Carens FJ (2001-2006) - снятие и установка компрессора кондиционера

REMOVAL AND INSTALLATION 1. Remove the drive belt by referring to the "EM Group". (Diesel 2.0) Remove the drive belt after loosening the power steering pump pulley. (1.6G, 1.8G) 2. Discharge the refrigerant. 3. Remove the discharge and suction hoses. 4. Remove the compressor.  1 copy.jpg   22.58К   11 Количество загрузок: 5. Installation is the reverse of removal. Tightening torque 20 - 25 N·m (2.0 - 2.5 kg-m, 14 - 18 lb-ft)